Spectra Precision HV302 - Line Scan - Vertical Setup (Standard mode); Vertical Line Scan Procedure

Line Scan – Vertical Setup (Standard mode)
When setting up the unit vertical, Line Scan centers
the rotor horizontally and can be used to align the
laser reference to a desired line position. Line Scan
can be activated as a standard feature as well as
using the menu.
 Pressing and releasing the buttons
simultaneously starts Line Scan while the rotor
checks the limits of the X- axis (beeps) and stops at
the center position (all laser LEDs are turned off) .
 Pressing the button stops the movement and
changes the unit into manual mode.
 Fine corrections left and right can be done using
buttons.
 Press and release the button again to change the
unit back to full automatic mode.