Spectra Precision LL300S Hands-On Training

Activating/Deactivating Standby mode
Standby mode helps to increase the battery life
and controls the laser setup during breaks. The
self-leveling and rotation will be stopped and the
beam will be turned off while the HI alert is still
active.
§ Press and hold the Manual button at the laser or
remote control for 3 seconds activates the
Standby mode.
– The HI/MAN LED at the laser flashes red every 5
seconds while the RC402N display shows
Standby.
To deactivate Standby mode and restore full
operation of the laser, press and hold the
Manual button at the laser or remote control again
for 3 seconds.

Spectra Precision LL300S Specifications

General

Brand	Spectra Precision
Model	LL300S
Category	Laser Level
Language	English