Activating/Deactivating Manual Mode
§ “Manual” bypasses the laser’s automatic
leveling, to use the laser in slope or vertical
mode
§ Press and release the manual-mode button at
the transmitter or remote control
– Manual LED will flash red
§ Change the slope using the arrow buttons at
the laser (Y-axis) or remote control (both axes).
§ The remote‘s left/right buttons can be used for
vertical fine line adjustments.
§ To resume automatic self-leveling mode, press
manual button twice
Note: When set up vertically, the unit switches
always automatically into manual mode.
To Next Page
Loading...
