Spectra S1 Plus / S2 Plus Breast Pump Instructions for Use
{00169689 2} 8
8. LCD Display
9. Button Controls
10. Cleaning and Disinfection
1) First Time Use
Before using the Spectra S1 Plus or S2 Plus breast pump for the first time, disassemble and wash in warm, soapy water
all parts that come into contact with the breast and breastmilk.
2) After Every Use
① Disassemble and wash all parts of your pump kit that come into contact with the breast and breastmilk (breast shield kit,
valve head, membrane nipple, nipple cover, disk and cap) in warm water with mild soap. All parts in the pump kit are
dishwasher safe.
② Rinse in clean water and air-dry.
③ When parts are completely dry, cover until next use.
NOTE: TO PREVENT CONDENSATION FROM COLLECTING IN THE AIR TUBE, WASH AND DRY IT
IMMEDIATELY. IF CONDENSATION REMAINS IN THE AIR TUBE, REPLACE THE TUBING. TO CLEAN THE
MAIN BODY, WE RECOMMEND WIPING WITH A CLEAN, DAMP (NOT WET) CLOTH (NO SOAP).
To Next Page
Loading...
