SpectraLink 7212 - Answering and Ending Calls

Spectralink 7202/7212 Handset User Guide
Spectralink 72-Series Handset User Guide.docx
April 2023 34
Answering Calls
Answering/Ending a Call
Note:
The handset must be subscribed and registered to make/answer a call.
When the handset rings, the display will show the icon for incoming calls and the caller
information will appear below if supported by the subscribed system (only the caller’s
number will appear if the screen is locked). Call Answered Elsewhere is also supported and
the notification is shown in the display, when the call is answered elsewhere.
• To answer or end a call, press
Caution:
Do not hold the handset next to your ear when it is ringing as you can risk serious and
permanent damage to your hearing.
Note:
You can distinguish between an internal and external call by the ring tone. This is a
system dependent feature.
Auto Answer
When auto answer is turned on , the handset automatically goes off hook when an
incoming call arrives.
If subscribed to a Spectralink wireless solution, the handset automatically goes on hook
when calls are ended.
To Turn Auto Answer On/Off
1. Press Menu to enter main menu.
2. Scroll to Settings, and press Select
3. Scroll to Auto answer, and press Select.
4. Press Change to select between On or Off.
For more information about auto answer settings, see “Auto Answer” on page 78.