What to do if SpectraLink Handsets turns off during a call?
If your SpectraLink Handset turns off during a call, the battery may need charging. Charge the battery. If charging doesn't resolve the issue, the battery might be defective and needs replacement.
How to fix SpectraLink 7710 Handsets when it freezes?
If your SpectraLink Handset freezes, try removing and replacing the batteries. Then, press the left softkey to turn the handset back on.
What to do if SpectraLink Handsets does not ring?
If your SpectraLink Handset isn't ringing, check to see if Silent mode is enabled and turn it off.
What to do if my SpectraLink Handset turns off during a call?
If your SpectraLink Handset turns off when you receive a call or go off-hook, the first step is to charge the battery. If the problem persists after charging, the battery might be defective and should be replaced.
How to fix a SpectraLink Handset that is not ringing?
If your SpectraLink Handset isn't ringing, check to see if Silent mode is turned on. If it is, turn it off.
What to do if SpectraLink 7710 cannot find a system ID?
If your SpectraLink Handset can't find a system ID at Create Login, verify that the system is configured to allow subscriptions.
Why SpectraLink Handsets cannot subscribe even if system ID has been found?
If your SpectraLink Handset cannot subscribe even after finding the system ID, check if an Authentication Code is required. If you're subscribing to an older DECT server or other servers, try setting 'Use extend location' to 'No'.
What to do if SpectraLink 7710 is getting error information?
If your SpectraLink Handset is displaying error information, ensure the main system the handset connects to is operating correctly before considering handset repair.
Why does my SpectraLink Handset keep freezing?
If your SpectraLink Handset is freezing, try removing and then replacing the batteries. After doing this, press the left softkey to turn the handset back on.
What to do if SpectraLink Handset cannot subscribe after finding system ID?
If your SpectraLink Handset cannot subscribe even after finding the system ID, verify if an Authentication Code is required. Also, if you are subscribing to an older DECT server or other servers, try setting 'Use extend location' to 'No'.
General| Brand | SpectraLink |
|---|---|
| Model | 7710 |
| Category | Handsets |
| Language | English |
To Next Page
