SpectraLink 7710 - Answering Calls; Auto Answer; Mute a Call; Reject a Call

Spectralink 7710, 7720, 7740 User Guide
14184663 Version 8.0
September, 2013 20
Chapter 5: Answering Calls
The handset must be subscribed and registered to answer a call. When handset rings, display
shows the icon for incoming calls and the caller information appears below if supported by the
subscribed system.
• Press to answer a call when your handset rings.
Auto Answer
When auto answer is turned on, the handset automatically goes off hook when an incoming call
arrives.
If subscribed to a wireless solution, the handset automatically goes on hook when calls are
terminated.
Auto answer is inactive, when the handset is charging.
1 Press Menu to enter main menu.
2 Scroll to Settings and press Select.
3 Scroll to Auto answer and press Select.
4 Scroll to On or Off and press Change.
Mute a Call
• When the handset rings, press Silence to mute the ring signal.
Reject a Call
Rejecting a call is system dependent. If supported by the subscribed system, do the following:
• When the handset rings, press Reject to refuse the call. The rejected call is registered as a
missed call.
Note
You can distinguish between an internal and external call by the ring
tone.This is a system dependant feature.