SpectraLink 7212 - Page 89

Spectralink 7202/7212 Handset User Guide
Spectralink 72-Series Handset User Guide.docx
April 2023 89
4. Scroll to Login, and press Select.
5. Scroll to Create login: search, and press Select. The handset will start searching
for a system.
6. Scroll to the relevant system, and press Select.
7. If required, enter an AC Code and User ID and press Ok to connect to the system.
8. Press Ok.
To Create Login by Entering ARI of System Directly
1. Press Menu to enter main menu.
2. Scroll to Settings, and press Select.
3. Scroll to Advanced, and press Select.
4. Scroll to Login, and press Select.
5. Scroll to Create login: manual and press Select.
6. Enter the relevant ARI. Contact your system administrator for more information.
7. If required, enter an AC Code and User ID.
8. Press Ok. The handset will start searching for a system with the entered ARI.
9. Press Ok.
Activating Automatically Login
Note:
To activate auto login, your handset must be subscribed to two systems.
Auto login should only be used when systems are separate, with no overlaps.
When auto login is turned on, the handset automatically changes to another system when
necessary.
1. Press Menu to enter main menu.
2. Scroll to Settings, and press Select.
3. Scroll to Advanced, and press Select.
4. Scroll to Login, and press Select.
5. Scroll to Auto login, and press Select.
6. If Off is selected, press Change to select On.