SpectraLink 7212 - Page 93

Spectralink 7202/7212 Handset User Guide
Spectralink 72-Series Handset User Guide.docx
April 2023 93
Message List Content
You can define whether your list of MSF messages in the inbox/outbox is to show the call
back number (or contact number if number is in the phone book) or part of the text message.
1. Press Menu to enter main menu.
2. Scroll to Settings, and press Select.
3. Scroll to Advanced, and press Select.
4. Scroll to Message list Content, and press Select.
5. Press Change to select between the options.
Noisy Environment
If you are working in a noisy environment, it is possible to define this in the handset.
Note:
If Noisy environment is set to On, you may experience echo when moving to quiet
environments.
Note:
If echo cancellation is enabled, settings under Noisy environment are overruled. If
none of them are enabled, soft talk shift function is used.
1. Press Menu to enter main menu.
2. Scroll to Settings, and press Select.
3. Scroll to Advanced, and press Select.
4. Scroll to Noisy environment, and press Select.
5. Press Change to select between On or Off.
Flash LED on Call
You can set your handset LED to flash when receiving an incoming call.
To Set Flash LED to On/Off
1. Press Menu to enter main menu.
2. Scroll to Settings, and press Select.