EasyManua.ls Logo

SpectraLink IP-DECT Server 200 - Spectralink IP-DECT Base Station Specifications

SpectraLink IP-DECT Server 200
29 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Spectralink Servers and Base Stations Feature List
722-0211-000_A.docx
November 2020 25
ENVIRONMENTAL CONDITIONS
• Operating temperature: 10 - 40º C (50 - 104º F)
• Storage temperature: -50 - 70º C (-58 - 158º F)
• Relative humidity: between 20% and 80% (non-condensing)
• Compliance with the requirements of EU directive 2015/863/EU (ROHS) and
2012/19/EU (WEEE)
PHYSICAL CHARACTERISTICS
• Size: 100 x 100 x 43 mm (3.94 x 3.94 x 1.69 in.)
• Weight: 120 gr. (4.2 oz)
• Grey-white (NCS 0502-Y)
• Wall-mountable, indoor
• Can be mounted upside down
Note:
The Spectralink Digital DECT Base Station is regulatory-certified for frequency
bands used in North America, Europe, Australia and New Zealand.
Spectralink IP-DECT Base Station
SYSTEM ARCHITECTURE
• The Spectralink IP-DECT Base Station does have 12 channels, but only 11 can be
used when synchronizing over the air.
NETWORK
• 10/100 Mbps Ethernet port
• Manual or dynamic host configuration protocol (DHCP)
• Time and date synchronization from the Spectralink DECT Server
• Event logging
• LED status indication
PROVISIONING
• Base station firmware (License required on server)
RADIO INTERFACE
• RF output 20 to 24 dBm at antenna connection
• Sensitivity: typical -90 dBm measured at antenna connection at BER = 0.001