Synchronization and Deployment Guide
Sync latency in sync chains.
Propagation through building materials – dense materials influence propagation negatively.
Base stations shall be placed away from reflecting materials like metal.
Base stations shall be placed away from other DECT base stations.
“When in doubt deploy”, i.e. to ensure a good coverage place one more rather than one less
base station.
A good documentation of the deployment is needed to build the synchronization chains.
Digital Base Stations and IP Base Stations using LAN
Synchronization
In DECT/IP-DECT systems it is important to ensure an overlap on the base stations at all timers
of 15 m to ensure a call can be handed over at normal walking speed.
Note
Synchronization between the digital base stations is not necessary in these systems, as
synchronization between the base stations is handled automatically by the DECT servers.
14169000 Version 9.3
October, 2016
To Next Page
Loading...
