Synchronization and Deployment Guide
Before You Begin
This guide assumes the following:
You have a working knowledge of deployment in general
You have completed the technical training
Related Documentation
For information about Spectralink DECT/IP-DECT Server Solutions not covered by this manual,
refer to the following documentation.
Terminology and Acronyms
Table 2 refers to common terms and acronyms that are related to the Spectralink DECT/IP-DECT
solutions that are found through this document.
14169000 Version 9.3
October, 2016
The act of locating the mounting location and installing
base stations and repeaters
A process initiated by the handset in which the speech channel
carrying an active conversation is passed from one base station
to another.
The erlang is a dimensionless unit that is used in telephony as
a measure of offered load or carried load on service-providing
elements such as telephone circuits or telephone switching
equipment.
Signal Quality Factor value. An expression of the bit failure rate
in the communication between the handset and a base station.
The value has a max. of 64, equal to no bit errors measured.
User Guides on http://spectralink.com
Spectralink DECT/IP-DECT Servers
User Guides on http://spectralink.com
Spectralink Technical News
Newsletter that describes software
changes, bug fixes, outstanding issues,
and hardware compatibility
considerations for new software
releases. To subscribe, go to
www.spectralink.com
To Next Page
Loading...
