EasyManua.ls Logo

SpectraLink IP-DECT SERVER 6500 - System Architecture and Network; Radio Interface and Performance

SpectraLink IP-DECT SERVER 6500
29 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Spectralink Servers and Base Stations Feature List
722-0211-000_A.docx
November 2020 12
12 wireless users/six simultaneous calls
Optional 60 users *
Note:
* The Spectralink IP-DECT Server 400 does have 12 channels, but is limited to
6 channels in basic version.
Multi-cell configuration:
1 x Spectralink IP-DECT Server 400, up to 9 x Spectralink IP-DECT Base Stations
and up to 3 x Spectralink DECT Repeaters (2 or 4 channel multicell) connected
on each Spectralink IP-DECT Server or Spectralink IP-DECT Base Station **.
12 wireless users/six simultaneous calls
Optional 60 users/24 simultaneous calls
Note:
** The Spectralink IP-DECT Base Station does have 12 channels, but only 11
can be used when synchronizing over the air.
SUPPORTED CODECS
G.711 A-law and μ-law
G.726 (32 kbps - 4 bit ADPCM)
G.729
NETWORK
10/100 Mbps Ethernet port
Manual or dynamic host configuration protocol (DHCP)
Time and date synchronization using Network Time Protocol (NTP)
LED status indication
PROVISIONING
Configuration
User data
Server firmware
Base station firmware (License required)
Handset firmware (License required)
RADIO INTERFACE
RF output 20 to 24 dBm at antenna connection

Other manuals for SpectraLink IP-DECT SERVER 6500

Related product manuals