SpectraLink IP-DECT SERVER 6500 - Spectralink Digital DECT Base Station; Server Connection and Radio Interface; Approvals and Requirements

Spectralink Servers and Base Stations Feature List
722-0211-000_A.docx
November 2020 24
Spectralink Digital DECT Base Station
SERVER CONNECTION
• LED status indication
• 2 or 4 wire connection to Spectralink DECT Server for max. 4 or 8 simultaneous
calls.
RADIO INTERFACE
• RF output 20 to 24 dBm at antenna connection
• Sensitivity: typical -90 dBm measured at antenna connection at BER = 0.001
• Average transmit power: typical 5mW/ch (US) or 10mW/ch. (EU)
• Peak transmit power: typical 125mW (US) or 250mW (EU)
• Typical range:
○ Indoor: 20 - 50 m. (65 - 165 ft.)
○ Outdoor: 300 m. (1000 ft.)
• Full slot DECT radio (12 channels)
• Possible to connect external antenna (Only Spectralink External Antenna can be
used)
ELECTRO MAGNETIC COMPATIBILITY (EMC) APPROVALS (REGULATORY
STANDARDS)
• EMC: EN 301 489 - 1
• EMC: EN 301 489 - 6
• FCC RULES, FCC PART15, SubpartD; RSS-213
• IC Rules RSS213 Issue 2
SAFETY (REGULATORY STANDARDS)
• UL 60950-1 CAN/CSA-C22.2 No. 60950-1-03
• Safety: EN 60950 - 1
DECT RADIO APPROVAL
• EN 301 406
ELECTRICAL REQUIREMENTS
• Phantom powered from DECT Server ower the twisted pair.
• Typical power consumption: 1 W per unit
• External antenna connection (Only Spectralink External Antenna can be used)