14219104-IG, Edition 4.0
June 2017, Original document
9
Digital DECT Base Station - front
1. RJ45 port
Base Station LED Indicators
Below you will find information about LED indicators on the base station.
Front Cover
The base station front cover has one indicator describing the base station faults and failures. The
indicator is off when the base station is not powered. The LED flashes when the base station ini-
tializes. The indicator is on when the base station is operating.
LED Indicator Meaning
Steady green OK and idle
Slow green flashing OK and active voice call
Fast green flashing Base station is initializing or busy (all channels are in
use)
Red flashing Updating firmware in base station
Steady red Just powered on
Spectralink Digital DECT Base Station Installation Guide
To Next Page
Loading...
