EasyManua.ls Logo

SpectraPure PERFORMANCE PLUS MC-RODI-100-PPLUS User Manual

SpectraPure PERFORMANCE PLUS MC-RODI-100-PPLUS
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
PERFORMANCE PLUS™
100 GPD Ultra-High Efficiency RO/DI
(MC-RODI-100-PPLUS)
OWNER’S MANUAL
&
INSTALLATION INSTRUCTIONS
WARNING
Please read carefully before proceeding with installation. Failure
to follow any attached instructions or operating parameter may
lead to the product’s failure and possible damage to property.
2017-10-25
Question and Answer IconNeed help?

Do you have a question about the SpectraPure PERFORMANCE PLUS MC-RODI-100-PPLUS and is the answer not in the manual?

SpectraPure PERFORMANCE PLUS MC-RODI-100-PPLUS Specifications

General IconGeneral
BrandSpectraPure
ModelPERFORMANCE PLUS MC-RODI-100-PPLUS
CategoryWater Filtration Systems
LanguageEnglish

Summary

Owner's Manual & Installation Instructions

WARNING

Critical safety notice regarding installation and operation, potential for damage.

System Components Overview

UHE Control Module

System Monitoring and Operation

Preparation for Installation

Setup Procedures

Install High & Low Float Switches

Step-by-step guide for installing float switches in the storage tank.

Connect Bulkhead Fitting

Instructions for installing the bulkhead fitting for water flow management.

Install the Float Valve

Details the installation process for the reservoir's fill and safety float valve.

Connect Water Lines

Guides connecting the system to the cold water supply and output lines.

Waste Water Line Installation

Instructions for routing the waste water line, including optional drain saddle use.

Connect Power and Start System

Steps for connecting the power supply and initiating system operation.

Erratic Operation Troubleshooting

Provides a diagnostic test for troubleshooting erratic system behavior related to floats.

Maintenance Procedures

Troubleshooting Guide

Low Production Rate

Identifies causes and solutions for reduced water production from the system.

Zero Production Rate

Addresses issues causing a complete lack of water production and their resolutions.

Extremely High Production Rate

Explains potential causes and solutions for abnormally high water output.

Related product manuals