SpectraPure MarinePRO - User Manual

SpectraPure
SpectraPure®Inc. 480.894.5437 Call us toll-free 1.800.685.2783
2167 East Fifth St, Tempe, Arizona 85281
®
24
Replacement Parts
Model Replacement Part
SF-MT-1.0-10 1 micron MicroTec™ Sediment Filter
CF-1-10 1 micron Carbon Block Pre-Filter
SF-MT-0.5-10 0.5 micron MicroTec™ Sediment Filter (upgrade)
CF-0.5-10 0.5 micron Carbon Block Pre-Filter (upgrade)
MEM-0100 100 gpd (340 lpd) TFC Membrane
(use 2 for 180 gpd (680 lpd) System)
FR-100 Flow Restrictor for 100 gpd (340 lpd) System
FR-200 Flow Restrictor for 200 gpd (680 lpd) System
GHA-4 1/4” (6.35 mm) Garden Hose Adapter
XWR-UNIV Filter Wrench
Optional Accessories
Model Optional Part
FAU-SMP Quick Connect Faucet Coupler
TK-CL-25 Total Chlorine Test Kit
TS-C61 Conductivity (micro-Siemens)Tester
TS-T71 TDS (Total Dissolved Solids)Tester
VA-FVK-4 Flush Valve Kit
BPLF-MO-115 Low-Flow Booster Pump, 115V
BPLF-MO-230 Low-Flow Booster Pump, 230V
BPHF-MO-115 Hi-Flow Booster Pump, 115V
BPHF-MO-230 Hi-Flow Booster Pump, 230V
TS-C61 Conductivity Meter
See our Catalog or our Web Site for Liquid Level
Controls and other Optional Accessories
REV 02-27-2008
Reverse Osmosis Water Purification System
(Single and Dual Membrane Models)
The MarinePRO
™ RO
System
INSTALLATION AND OPERATING
MANUAL
WARNING
Please read carefully before proceeding with installation. Failure to
follow any attached instructions or operating parameter may lead to
the product’s failure and possible damage to property.

Summary

SpectraPure MarinePRO RO System Installation and Operating Manual

Important Safety Warning

Crucial warning for users before proceeding with installation or operation.

Choosing a Mounting Location

Light Source Considerations

Temperature Extremes Considerations

Tips for Long Membrane Life

Troubleshooting Guide

Low Water Production Rate Issues

Steps to diagnose and fix issues related to reduced purified water output.

RO Membrane Performance Troubleshooting

Methods for diagnosing RO membrane condition and performance.

Membrane Output Calculation Example

Testing Membrane Quality

System Specifications

Feed Water Requirements

Membrane Output Calculations

System Description

RO Membrane Replacement Procedure

RO Membrane Diagnostics

System Initialization and Setup

System Hook-Up Steps

Measuring Waste to Product Water Ratio

Carbon Block Filter Replacement

Sediment Pre-Filter Replacement

Flow Restrictor Adjustment and Replacement

SpectraPure MarinePRO Specifications

General

Membrane Type	Thin Film Composite (TFC)
Feed Water Temperature Range	40-100°F (4-38°C)
Chlorine Tolerance	0 ppm (requires pre-filtration)
Pre-Filter Stages	Sediment Filter, Carbon Block Filter
Type	Reverse Osmosis System
Application	Saltwater Aquariums
Capacity	Up to 90 gallons per day (GPD)
Rejection Rate	98%
Post-Filter Stage	DI Resin Filter
DI Resin Capacity	Varies by model
Product Water TDS	0-1 ppm (typical)
Waste Water Ratio	3:1 to 4:1 (waste:product)
Housing Material	Polypropylene
Fittings	Quick Connect
Included Booster Pump	No (available as an add-on)
Pre-filters	5 micron sediment filter, 5 micron carbon block
Post-filter	Refillable DI Cartridge
Dimensions	Varies by model
Weight	Varies by model