Need help?Do you have a question about the SpectraPure UltraPrecise ATO and is the answer not in the manual?
General| Brand | SpectraPure |
|---|---|
| Model | UltraPrecise ATO |
| Category | Controller |
| Language | English |
Explains the functionality of the Ultra Precise ATO unit as a fill or drain controller with an integrated peristaltic pump.
Guides users to understand the basic operation and components of the ATO unit before connection.
Provides a rapid setup procedure for the ATO unit, focusing on initial power-up and basic operation.
Step-by-step instructions to configure the ATO for filling mode, setting the lower and upper water limits.
Step-by-step instructions to configure the ATO for draining mode, setting the lower and upper water limits.
Procedure to set the pump's on-time within a 20-second cycle for precise liquid delivery control.
Instructions on how to adjust the pump's operating speed in 10 steps for flow rate control.
Details on how pump speed is indicated by LED lights and adjusted using UP/DOWN buttons.
Explains the duty cycle function, its purpose, and how to set pump run times within a 20-second cycle.
Instructions for initial system startup, including pump break-in and connecting tubing.
Detailed instructions for inspecting, cleaning, or replacing tubing and rollers in the pump head.
Addresses common problems such as excessive noise, no LEDs, or pump running without fluid.
Details the warranty coverage for defects in material and workmanship for a period of 5 years.
Guidance on how to obtain full advantage of the FIVE YEAR WARRANTY by returning the Warranty Card.
To Next Page
