Spectronic 20+ Series User Manual

SPECTRONIC 20'" series
Introduction
Environmental and electrical requirements Storage environment
The SPECTRONICII 20 series of spectrophotometers
has been designed to operate under the environmental
and electrical r'equirements listed below.
-40°F to 140°F (-40°C to 60°C)
Relative humidity not to exceed 60%
Allow instrument to adjust to room temperature for 24
hours after taking it out of storage.
Line voltages
Altitude
Catalog #
333182-000
333182-002
333182-004
333182-005
Line voltage
115VAC
220V AC
240V AC
l00VAC
Frequency Current
60 Hz 0.9 Amp
50/60 Hz 0.5 Amp
50/60 Hz 0.5 Amp
50/60 Hz 0.9 Amp
From below sea level to 2000 meters (6562 feet)
For indoor use only
333183-000
333183-002
333183-004
333183-005
115V AC
220V AC
240V AC
lOOVAC
60Hz
SO/60Hz
SO/60Hz
SO/60Hz
1.0 Amp
0.5 Amp
0.5 Amp
1.0 Amp
Installation Category II
Pollution Degree 2
Operating environment
The instrument meets the specifications on the previous
page under the following conditions after a 30-minute
warm-up period.
Your insb"ument package includes:
.SPECTRONICC8> 20+ (Cat. No. 333182) or
SPECTRONICC8> 200+ (Cat. No. 333183)
spectrophotometer
.SPECTRONIC'1 20+ Series Spectrophotometers
Operator's Manual (Cat. No. 333182-10001)
.Box of 12 test tube cuvettes (Cat. No. 331780)
.Oust cover (Cat. No. 332961-149)
.Y2" Adapter (Cat. No. 333178)
.1/16" Allen wrench (Cat. No. 332260-174) for
interchanging test-tube adapters
Relative humiditl'
20% to 80%
20% to 70%
20% to 60%
20% to 50%
Ambient temperature
50°F to 75°F (15°C to 24°C)
76°F to 85°F (25°C to 29°C)
86°F to 95°F (30°C to 35°C)
96°F to 105°F (36°C to 40°C)
Temperature should be maintained at :t4 of (:t2 °C).
Relative humidity should be maintained to :t5%.
"

Spectronic 20+ Series Specifications

General

Brand	Spectronic
Model	20+ Series
Category	Measuring Instruments
Language	English