Chapter 8: Maintaining Your Module and Ensuring Safety 8-3
Owner’s Guide 0300199-01 Rev. D
WARNING
WARNING
THIS DEVICE IS INTENDED TO ONLY BE USED WITH THE
ALLEN-BRADLEY CONTROLLOGIX 1756 I/O
Note that your module contains electrostatic components that are susceptible to
damage from electrostatic discharge (ESD). An electrostatic charge can
accumulate on the surface of ordinary wrapping or cushioning material.
In the unlikely event that the module should need to be returned to Spectrum
Controls, Inc., please ensure that the unit is enclosed in approved ESD packaging
(such as static-shielding/metallized bag or black conductive container). Spectrum
Controls, Inc. reserves the right to void the warranty on any unit that is
improperly packaged for shipment.
RMA (Return Merchandise Authorization) form required for all product returns.
For further information or assistance, please contact your local distributor, or call
the Spectrum Controls technical Support at:
For Rockwell Automation Compatible I/O Products:
• USA 440-646-6900
• United Kingdom 01908 635230
• Australia 1800-809-929
• Mexico 001-888-365-8677
• Brazil (55) 11 3618 8800
• Europe +49 211 41553 630
Declaration available upon request.
To Next Page
Loading...