309
FUEL SYSTEM LABOR OPERATIONS
Engine–Internal Components
LABOR OPERATION DESCRIPTION
OPERATION
NUMBER
TIME
ALLOWED
TIMING COVER OIL SEAL–REPLACEMENT
Includes: R&R balancer
J0750
0.7
TIMING COVER AND/OR GASKET–REPLACEMENT
Includes: R&R balancer
J0780
2.0
TIMING CHAIN–REPLACEMENT
ADD: Replace crankshaft gear
J0820
1.6
0.2
CAMSHAFT TIMING GEAR–REPLACEMENT
ADD: Replace crankshaft gear
J0840
3.9
0.2
CAMSHAFT–REPLACEMENT J0850
6.0
OIL PAN AND/OR GASKET–REPLACEMENT
Includes: Fluid replacement
J1000
2.2
PUMP, ENGINE OIL–REPLACEMENT
Includes: R&R engine oil pan and fluid replacement
J1020
2.5
SEAL, REAR MAIN BEARING–REPLACEMENT
Includes: R&R engine oil pan and fluid, replace lower seal and repack
upper seal
J1120
2.8
BEARING, CRANKSHAFT MAIN–REPLACE ONE
Includes: R&R engine oil pan and fluid, and use of plastic type gauge
ADD: Replace main bearings
Each additional (NOT to equal or exceed ALL)
All main bearings
ADD: Replace connecting rod bearings
Each additional (NOT to equal or exceed ALL)
All rod bearings
J1200
4.1
0.5
1.2
0.3
1.2
To Next Page
Loading...