310
FUEL SYSTEM LABOR OPERATIONS
Engine–Internal Components
LABOR OPERATION DESCRIPTION
OPERATION
NUMBER
TIME
ALLOWED
BEARING, CONNECTING ROD–REPLACE ONE
Includes: R&R engine oil pan and fluid, and use of plastic type gauge
ADD: Replace connecting rod bearings
Each additional (NOT to equal or exceed ALL)
All rod bearings
J1180
2.9
0.4
2.0
PISTON, ROD AND/OR RINGS–REPLACEMENT
Includes: R&R all necessary components and use of plastic type gauge
ADD: Replace rings only
Each piston (NOT to exceed ALL)
All pistons
ADD: To replace connecting rods only
Each rod (NOT to exceed ALL)
All rods
ADD: To replace pistons only
Each piston (NOT to exceed ALL)
All pistons
J1308
3.3
0.4
2.2
0.3
1.2
0.4
2.4
PLUG, EXPANSION–REPLACEMENT
Note: Use appropriate labor operation(s) for removal of necessary
component(s) to gain access to plug
J1600
0.3
PLUG, OIL GALLERY–REPLACEMENT
Note: Use appropriate labor operation(s) for removal of necessary
component(s)
J1640
0.3
To Next Page
Loading...