Spectrum 37130 User Manual

0118583R6 Page 1 of 4
Assembly Instructions
Important
Before you begin, read and comply with all safety and operating instructions,
and ensure all parts and correct quantities are included.
Any parts damaged during shipment must be reported within 5 days of receipt. To
report information regarding missing parts or damage, to purchase parts or acces-
sories, or if you have any questions, please contact us.
www.spectrumfurniture.com
800-235-1262, 715-723-6750
Thank you for purchasing Spectrum products!
Display Stand
37130
(1) 0192849
VESA mount
(4) 0108896
1/4-20 Flanged
serrated locknut
(12) 052605
1/4-20 x 15mm
JC bolt
(1) 0118193
End cap 3” x 3”
(1) 0118510
Upright assembly
(1) 0131924
Upright bracket
Figure 1
Rubber thread
protectors
Bottom of upright
assembly
(1) 025039
4mm Hex wrench
1. With the upright assembly upside-down, remove the rubber
thread protector from each threaded stud. Figure 1.
󰀨
Installation

”
4mm

Spectrum 37130 Specifications

General

Brand	Spectrum
Model	37130
Category	Racks & Stands
Language	English

Summary

Assembly Instructions

General Installation

Steps for attaching the upright assembly to the worksurface and securing it, including parts identification.

Monitor Installation

Procedure for mounting the monitor onto the stand's upright bracket using specified hardware.

InVision Nano Table Installation

Specific instructions for installing the display stand onto InVision Nano tables, involving end panel removal.