Copyright 2020. Speech Recognition Solutions, LLC.
So, to recap, if you are using Dragon 15 Pro, Dragon 15 Premium, Dragon 15 Legal, DMPE4, the
TableMike will represent a change in the sound converting device. Dragon will sense that it is
available and will launch a dialog box similar to the one shown above and ask you to confirm
which sound device you are using and after you select the appropriate device, Dragon will
complete its start-up and you’ll be all set.
And that’s it!
Dragon 12, 12, 13, or 14:
If using a new TableMike with an older version of Dragon NaturallySpeaking, you have several
options in terms of how to integrate your microphone with Dragon:
a. Simply substituting the TableMike for your old mic and running the audio set-up wizard
b. Adding the TableMike as a new “source” to an existing profile
c. Creating an entirely new user profile based on the TableMike
Of these options, we consider the middle option the best, both because it allows you to save all
the personalized words and commands in your current profile, and yet still afford you the
opportunity (based on the version of Dragon you are using) to do some limited reading and
training with the new microphone.
Here is an overview of the process based on your Dragon version:
1. Select Dragon > Open User ..
2. On the far right of the Open User dialog,
click on “Source” and then “New”
3. Select the new source (TableMike) from
those listed and follow subsequent
instructions
To Next Page
Loading...