Speech Recognition Solutions SpeechWare TableMike - TableMike Configuration Utility; Downloading the Configuration Utility

Copyright 2020. Speech Recognition Solutions, LLC.
• Red: muted (off)
• Green: on and in Long Distance mode
• Blue: on and in Normal mode
Mode
Normal (Blue)
Distant (Green)
Operating Range
2-10 inches
10-20 Inches
Auto Gain
Minimal
Most Intense
External Noise rejection
High
Moderate
Speech Equalization
Inactive
Active
Playback Sound Quality
Most Natural
Artificial sounding
Ideal Usage Situation
Moderate or high noise
Low ambient noise
Comments
Best setting in moderate
or more noise
Best if low noise; most
convenient given
distance flexibility
Using the Downloadable TableMike Configuration Utility
An optional utility which can be downloaded for free from SpeechWare is called the TableMike
Config utility and allows you to program the volume up and volume down buttons on the
TableMike to perform a variety of functions very similar to what is seen in SpeechWare’s
Octopus USB Controller (OUC), but in a constrained way compared with OUC.
Because each of the two button can be assigned behaviors based on any of three depression
sequences (single push, double push, and long push), a total of 6 functions can be assigned to
your TableMike
Specific functions which can be programmed to the TableMike volume up and volume down
buttons include:
• Emulate any build-in or user-created Dragon command
• Insert boilerplate text
• Initiate any Dragon Hot-key
• Emulate any Windows key or key-combination
• Launch any application, folder, document or website
• Initiate any of a series of Windows functions
How to download the free Utility:
1. Go to https://www.tablemike.com/applications/
2. Scroll down on the page until you reach the “TableMike Config for TableMike” area