SpeeCo SPLITMASTER 401625UB

Need help?

Do you have a question about the SpeeCo SPLITMASTER 401625UB and is the answer not in the manual?

Summary

Important Safety Information

Intended Use

Defines the sole purpose of the log splitter for splitting wood. Any other use can cause serious injury or death.

Personal Protective Equipment

Specifies essential safety gear like goggles, safety glasses, steel-toed shoes, gloves, and hearing protection.

Safety Decals

Emphasizes maintaining readable safety decals and replacing missing or defaced ones for proper warnings.

Operator Safety and Guidelines

Operator Safety

Key safety rules for the operator, including reading the manual, keeping others away, and avoiding distractions.

General Safety

Broad safety principles covering manual use, operator awareness, work area, and general precautions.

Preparation of the Log

Guidelines for preparing logs for splitting, including cutting ends square and maximum length.

Work Area Safety

Ensures the log splitter is operated in a safe, clear, level area, away from hazards and enclosed spaces.

Operation of the Log Splitter

Focuses on operating the log splitter from the designated operator zone for maximum safety.

Maintenance and System Safety

Repair and Maintenance Safety

Precautions for performing maintenance, including checking tightness, using correct parts, and disabling power.

Hydraulic Safety

Guidelines for safe handling of the hydraulic system, including leak detection and fluid pressure warnings.

Fire Prevention

Safety measures to prevent fires related to flammable fluids like gasoline and hydraulic oil.

Towing Safety

Instructions for safely towing the log splitter, including proper attachment and speed limits.

Assembly Instructions

Step 1: Component Removal and Inspection

Instructions for removing components from the shipping container and inspecting for damage.

Step 2: Wheel Attachment

Details on attaching the wheels to the tank assembly using specified hardware.

Step 3: Tongue Assembly Attachment

Guidance on attaching the tongue assembly to the tank assembly using bolts, washers, and nuts.

Step 4: Beam and Tongue Assembly

Procedure for connecting the beam to the tongue/tank assembly using pivot and clip pins.

Step 5: Hydraulic Pressure Hose Connection

Connects the hydraulic pressure hose from the pump fitting to the valve fitting.

Step 6: Hydraulic Return Hose Connection

Connects the hydraulic return hose from the filter fitting to the valve fitting with a clamp.

Step 7: Latch Assembly Attachment

Attaches the latch assembly to the beam and tongue, securing the beam in horizontal position.

Operating Instructions and Recommendations

Operating Instructions

General guidance for operating the log splitter, including safety warnings and setup procedures.

Engine Oil Recommendations

Specifies the correct engine oil type based on operating temperature and capacity.

Starting Instructions

Provides step-by-step guidance for starting the Briggs & Stratton engine.

Operation

Details on setting up and operating the log splitter, including horizontal/vertical positioning and splitting logs.

Maintenance

Covers regular maintenance tasks like oil changes, filter replacement, and component checks.

Specifications