variety of habitats, detect and respond to
barometric pressure changes associated with
weather patterns.
The algorithm developed for the Angler’s
EDGE combines moon phase, and sun and
moon position, with barometric pressure
effects. All of these factors have been
combined into one comprehensive relationship
to predict fish feeding activity. The factors
used in the instrument were derived from a
variety of sources, including discussions
with meteorologists, fish biologists, anglers,
and extensive surveys of the scientific and
popular literature.
A combined total of over 40 years of fishery
research experience and personal observations
contributed to the development of the software
used in the instrument. All of this information
has been consolidated into the Angler’s EDGE
to provide anglers with the ability to determine
the best times to fish.
INITIAL SET UP
1. Two CR2032 Lithium button-cell batteries
are included with your Angler’s EDGE.
2. Using the provided small screwdriver,
remove the battery cover and insert the
batteries (positive side facing up), closing
the cover. Be sure to seat the rubber gasket
properly (this may take some patience).
3. Follow the SETUP guide to set the time,
date, coordinates and other settings.
To Next Page
Loading...