Speedtech Instruments AE-2 - Operation and Features; Display Modes

16. The longitude degrees will flash. Press the
– or + button to set the longitude degrees.
Press the SET button to confirm.
17. The longitude minutes will flash. Press the
– or + button to set the longitude minutes.
Press the SET button to confirm.
18. (present mode only) The altitude
compensation will flash. Press the – or +
button to set the local altitude (in feet or
meters, as selected in step 8). Press the SET
button to confirm.
The set up is now complete.
Note: the future time and date can only be set
for a time and date in the future or current time
and date. If a past time and/or date is set, the
time and date will default to the current set
time and date.
— OPERATION AND FEATURES —
DISPLAY MODES
Press the MODE button to scroll through
information, in either present or future modes;
no pressure will display in future mode.
TIME ➝ DATE ➝ YEAR ➝ PRESSURE
➝ SUNRISE ➝ SUNSET ➝ TIME
When in pressure mode, the graph at the top
will display 24-hour history.
The display will revert to the time display if no
buttons are pressed for one minute and will
turn off when no button is pressed for five
minutes (all settings remain, and air pressure is
still tracked).