Easy Flash Module 3.0 User Manual
EFM 3.0 V1.1 Speed Turtle Engineering LLC Page | 11
• If using the integrated vehicle switch ensure you are quickly
pressing the integrated switch twice. The specified switch
for truck is the bed lamp switch and the hazard switch for
all other vehicles.
Park mode will not
activate
• Ensure vehicle is in park
• Ensure switch input 1, switch input 2 or the integrated
vehicle switch is activated
• Ensure Park mode is enabled using the STE Configuration
Utility.
If problems persist after updating your module software and following the Troubleshooting
Matrix, contact us as support@SpeedTurtleEngineering.com or by visiting our website at
SpeedTurtleEngineering.com. Provide as many details as possible in addition to: vehicle make,
vehicle model, vehicle model year, module mode, current symptom and any troubleshooting steps
you may have already taken.
To Previous Page
Loading...