Speedway LEGER - Product Components and Assembly; Box Contents and Size; Instrument Panel and Brake Assembly; Serial Number Identification

06
Speedway leger User Manual
Product size
Product components
Assembling of the instrument panel, brake
-Adjust the position of the brake and
tighten the fixing bolt with a hexagon
wrench.
Checking the components inside of the box
Default battery charger(2A), Default tool, User manual, Body(Lithum battery included)
1100mm
* Depending on the method of measurement, errors may occur.
1170mm
Standard handle
width 530mm
Make a note of the serial number.
The serial number can be used
to check information such as
date of purchase, warranty
period, etc., and product
information can be checked even
if the product is lost or stolen.
(May vary depending on branch
office situation.)
- Locate the instrument panel and tighten
the fixing bolts.