SpeedyBee Bee35 Meteor LED - Page 2

The Meteor LED features an integrated wireless conguration
module, enabling easy setup and adjustments via the
SpeedyBee APP for your drone.
The Meteor LED is facto-prepared with pre-soldered LED strips
for your convenience.Follow the detailed installation steps provided
in the sections below.
The Bluetooth conguration module is set by default to
automatically turn o the Bluetooth conguration function one
minute after power is supplied
(the timer does not count during the conguration).
After the connection is disconnected, it will sta a new one-minute timer.
BEC has a red indicator light as the power indicator,
which stays on after power is supplied.
The rst LED on the light strip sees as the Bluetooth status indicator:
Solid green: Bluetooth is connected.
Flashing green: Bluetooth is not connected.
Green light o: Bluetooth is turned o.