Spektrum dx18qq User Manual

Instruction Manual
Bedienungsanleitung
Manuel d’utilisation
Manuale di Istruzioni

Spektrum dx18qq Specifications

General

Channels	18
Telemetry	Yes
Voice Alerts	Yes
Band	2.4GHz
Frequency	2.4GHz
Modulation	DSM2/DSMX
Display	LCD
Battery Type	Li-Ion
Weight	35.3 oz (1000g)
Dimensions	228 x 318 x 102 mm

Summary

About Quique Somenzini

Sol de Mayo Introduction

Manual Conventions and Notices

Meaning of Special Language

Explains terms indicating potential harm or property damage in the manual.

Initial Setup and Safety

General Notes and Pilot Safety

Covers safe operation, maintenance, and pilot safety practices.

Pre-Use Transmitter Instructions

Steps before using the transmitter, including registration and firmware.

Box Contents List

Lists all items included in the product package.

Transmitter Battery Management

Battery Precautions and Charging

Safety guidelines for handling, charging, and storing batteries.

Status Indicators and Alarms

Explains LED indicators and the low battery alarm system.

Transmitter Controls Overview

Control Identification

Labels and identifies all external transmitter controls and functions.

Physical Transmitter Adjustments

Adjust Throttle Friction and Ratchet

Instructions for adjusting throttle friction straps and ratchet.

Control Stick Length Adjustment

How to adjust the length of the control sticks.

Main Screen Interface

Main Screen Elements

Description of the primary display screen and its data fields.

Navigating the Transmitter Interface

Navigation Controls and Tips

Explains how to navigate menus, select options, and use navigation tips.

Binding Transmitter and Receiver

Binding Methods

Describes how to bind using receiver battery or ESC connection.

Failsafe Configuration

Failsafe Types and Programming

Explains SmartSafe, Hold Last Command, and Preset Failsafe options.

X-Plus™ 8 Expansion Module

Module Features and Applications

Lists module capabilities, applications, and specifications.

X-Plus Module Installation

Guidance on physically installing the X-Plus 8 module.

X-Plus Module Power System

Power System Requirements and Testing

Specifies power needs and provides guidelines for power system testing.

X-Plus Channel Configuration

X-Plus Channels and Failsafe

How to activate X-Plus and its failsafe behavior.

SD Card Usage

Installing the SD Card

Steps to insert the SD card into the transmitter.

Exporting Transmitter Serial Number

Saves serial number to SD card for registration.

Model Type Programming

Model Type Programming Guide

Overview of how model type selection affects menu options.

Common System Setup Functions

Model Selection and Naming

How to select, name, and manage model memories.

Model Type Selection

How to select the aircraft type (Airplane, Heli, Sailplane).

Flight Mode Configuration

F-Mode Setup and Naming

Assigning switches to flight modes and customizing names.

Flight Mode Table

Mapping flight modes to switch positions for aircraft/sailplanes.

Channel Configuration

Channel Assignment and Input

Reassigning receiver channels and transmitter inputs.

X-Plus Input Configuration

Assigning X-Plus channels to transmitter inputs.

Trim Setup and Assignment

Trim Setup Options

Adjusting trim step size, type (Common/F Mode), and assignment.

Model Management

Model Copy and Reset

Duplicating model settings and resetting to defaults.

Warning Setup

Programming alerts for unsafe switch or stick positions.

Telemetry Functions

Telemetry Overview and Settings

Installing module, configuring display, units, and data logging.

Preflight Checks and System Settings

Preflight Setup

Programming a pre-flight checklist for model startup.

Frame Rate and Modulation

Settings for frame rate, modulation mode, and X-Plus activation.

Bind Function

Binding a receiver without powering off the transmitter.

Trainer Functionality

Trainer Modes Explained

Details on Inhibit, Programmable, Pilot Link Master, and Slave trainer modes.

System Settings and Customization

Analog Switch Setup

Using sticks/pots as kick points for functions.

Core System Settings

Configuring User Name, Contrast, and Backlight.

System Configuration Options

Mode Conversion and Battery Alarms

Changing transmitter modes and configuring battery alarms.

Language and Region Settings

Changing display language and selecting regional settings.

System Alerts and Display Settings

Inactive Alarm and Extra Settings

Setting inactivity timers and configuring system sounds/vibrator.

System Information and Calibration

Serial Number and Software Version

Displaying transmitter serial number and AirWare version.

Transmitter Calibration

Step-by-step instructions for calibrating control sticks and sensors.

SD Card Data Transfer

Importing Model Data

Importing single or all model files from an SD card.

Exporting Model Data

Exporting single model files to an SD card.

SD Card and Software Updates

Exporting All Models and Software Updates

Exporting all models and installing AirWare software updates.

Servo Adjustments

Servo Setup Overview

Introduction to servo adjustment functions.

Basic Servo Adjustments

Travel Adjust, Sub-Trim, and Reverse settings for servos.

Advanced Servo and Control Adjustments

Servo Speed and Travel Limits

Adjusting servo response speed and absolute travel limits.

Balance and Dual Rate/Expo

Servo balancing and Dual Rate/Exponential settings.

Differential Throw and Throttle Cut

Control Surface Differential

Adjusting differential for ailerons and V-tails.

Throttle Cut Function

Assigning a switch to stop the engine or motor.

Throttle and Mixing Functions

Throttle Curve Optimization

Optimizing throttle response using adjustable curves.

Mixing Overview

Introduction to mixing functions for affecting multiple channels.

Advanced Mixing Features

Mix Assignment and Types

Assigning mixes to switches, Combo Mixing, and Back Mixing.

Fine-Tuning Mix Values

Details on 1/2% mixing values for fine adjustment.

Specialized Mixing and Sequencing

Origin Mixing

Using stick position as the primary input for a mix.

Sequencer Functionality

Programming timed sequential functions for multiple controls.

Sequencer Setup and Range Testing

Sequencer Setup

Configuring sequencer parameters like switches, timing, and names.

Range Test Procedure

Performing a radio link range check to confirm RF link operation.

System Utilities

Range Testing the DX18QQ

Detailed steps for performing a range test.

Timer Functions

Setting up countdown or stopwatch timers with alarms.

Telemetry Access and Reset

Accessing telemetry functions and resetting data.

Monitoring Servo and Channel Activity

Monitor Screen

Displaying servo positions graphically and numerically.

X-Plus Monitor Screen

Displaying X-Plus channel output graphically and numerically.

Aircraft Type Configuration

Aircraft Type Selection

Choosing wing and tail types for airplane models.

Model Image and Servo Connections

Selecting model image and diagrams for servo wiring.

Elevon Servo Control Options

Elevon Servo Control

Servo reversing options for delta wing models.

Flap and Mixing Systems (ACRO)

Flap System Configuration

Enabling and configuring flap programming and elevator mixing.

ACRO Mixing Options

Details on Rudder>Ail/Ele, Ail>Rudder, and Ele>Flap mixes.

Gyro and Pitch Curve (ACRO)

Acro Gyro Function

Setting up gyro gain points and curves for aircraft.

Pitch Curve Function

Adjusting collective pitch curves for variable pitch propellers.

Helicopter Configuration Options

Swashplate and Collective Settings

Selecting swash type and configuring collective pitch.

Helicopter Image and Pitch Curve

Selecting model image and adjusting pitch curves.

Swashplate and Gyro Settings (Helicopter)

Swashplate Adjustments

Adjusting Swashplate Mix, Exponential, and E-Ring.

Gyro Gain Assignment

Assigning gyro gain value to a switch or flight mode.

Governor, Tail Curve, and Mixing (Helicopter)

Governor Function

Setting rotor head speed using a governor.

Tail Curve and Mixing

Mixing tail rotor input with throttle/collective and Cyclic>Throttle mix.

Sailplane Configuration

Sailplane Type Selection

Choosing wing, tail, and motor types for sailplanes.

Sailplane Image Selection

Selecting a model image for the sailplane.

Sailplane Specific Adjustments

Camber System

In-flight camber adjustment and braking system.

SAIL Mixing Options

Details on Aileron>Rudder, Aileron>Flap, and Elevator>Flap mixes.

AR12120 PowerSafe Receiver System

System Overview and Features

Installation overview, applications, and key features of the receiver.

AR12120 Receiver Specifications and Battery Management

System Specifications

Technical details of the main unit and remote receivers.

Battery Requirements

Guidelines for using one or two batteries with the receiver.

Battery Guidelines and Receiver Installation

Battery Capacity and Voltage

Capacity recommendations and voltage requirements.

Main Unit Installation

How to install the main PowerSafe unit and switch.

Battery Installation and Remote Receiver Placement

Battery Connection

Connecting batteries and regulators to the system.

Remote Receiver Mounting

Antenna polarization and placement examples for optimal RF link.

Remote Receiver Setup and Binding

Remote Receiver Placement

Optimal placement of remote receivers to avoid interference.

Servo Connection and System Binding

Plugging in servos and procedures for binding the system.

Failsafe Functionality

Failsafe Types Explained

Overview of SmartSafe and Preset Failsafe functions.

SmartSafe Failsafe Details

Detailed explanation of SmartSafe operation and benefits.

Preset Failsafe Details

Detailed explanation of Preset Failsafe operation.

Advanced Failsafe and System Storage

QuickConnect and Brownout Detection

How brownout detection works and system reconnection.

System Storage Recommendations

Guidelines for storing the system to prevent battery drain.

Transmitter Physical Adjustments

Mode Conversion Procedures

Software and mechanical steps for changing transmitter modes.

Throttle Ratchet Adjustment

Steps to adjust the throttle ratchet strap for smooth or ratcheted throttle.

Gimbal Adjustments

Elevator and Throttle Limiting Adjustments

Adjusting elevator centering screw and throttle limiting wedges.

Stick Tension Adjustment

Adjusting stick tension using internal screws.

Throttle and Stick Adjustments

Throttle Grip Adjustments

Adjusting throttle friction straps and ratchet strap.

Control Stick Length Adjustment

Adjusting the length of the control sticks.

2.4GHz Troubleshooting Guide

Binding and Linking Issues

Troubleshooting problems with aircraft not binding or linking.

Failsafe and Response Issues

Troubleshooting failsafe mode activation or irregular control responses.

Troubleshooting and Parts List

Receiver Bind and Flight Log Issues

Troubleshooting lost bind, landing blinking, and flight log data.

Parts List

Lists all components included with the transmitter.

Model Aircraft Safety Code

A. General Safety Rules

General regulations for model aircraft flight and operations.

Radio Control Safety Guidelines

B. Radio Control Operations

Specific safety rules for RC aircraft operations and flying sites.

Regulatory Compliance Information

FCC Compliance and Antenna Safety

FCC rules and RF exposure guidelines for transmitter operation.

FAA Information and Resources

FAA Information

Guidance on FAA regulations and resources for model aviation.

1-Year Limited Warranty Details

Warranty Coverage and Exclusions

What the warranty includes and excludes.

Warranty Claims and Remedies

Purchaser's remedy, liability limits, law, and service contacts.

Service Procedures and Requirements

Inspection and Service Process

Procedures for submitting products for inspection and service.

Warranty and Non-Warranty Service

Requirements for warranty and non-warranty service.

Contact Information for Support and Parts

Warranty and Service Contacts

Contact details for warranty and service support by region.

Parts Order Contacts

Contact details for ordering replacement parts.

European Union Compliance and Disposal

EU Compliance and Declaration

EU compliance information and declaration of conformity.

WEEE Disposal Instructions

Guidelines for disposing of waste electrical equipment.

Notes