Spengler CL Series - Service Tasks; Step 9: Replace Extractor Fan

22
CL & PSL50 Series
SERVICE TASKS
Step 9: Replace extractor fan (biannually only)
Remove two screws securing grinder
panel at front and lift grinder assembly
up and set it aside on the canister
panel. Disconnect fan cable.
Lift extractor fan and manifold
assembly out and remove two screws
securing fan to manifold. Replace
extractor fan with new. Reinstall in
reverse order.
02
01
WARNING:
When working with electrical
components, always turn the
dispenser OFF at the main switch,
or disconnect the plug from the
outlet, to prevent risk of electrical
shock.