32
CL & PSL50 Series
Step 19: Reinstall espresso brewer
A
B
C
SERVICE TASKS
Reinstall espresso brewer into
dispenser by hooking base of brewer
onto mounting bar (A), rotating it
up/back (B), then secure it with red
locking latch (C).
Connect water supply tube by
simply pushing it into quick connect
tting approx. 1/2cm, it locks in
place automatically. Reconnect
espresso brewer’s outlet tube spout to
spout adaptor as close to centre of
adapter as possible.
To Next Page
Loading...
