Titmus V4 / Titmus V2
Cleaning / Storing the Instrument
• See accessory case provided with the instrument.
• Lens cleaning towlettes are supplied for cleaning the viewing lenses. Fog cloths are supplied to prevent the
viewing lenses from fogging.
CAUTION: DO NOT PUT FINGERS IN EYES OR MOUTH AFTER USING THE CLEANING TOWLETTE OR FOG CLOTH.
Eye Contact: wash eyes with cold water, get fresh air
Skin Contact: wash with water
Ingestion: Gastric irritation and vomiting. Do not induce vomiting, give plenty of water and consult a physician.
Prevent aspiration of vomited material induced by ingestion of product.
After first aid, get appropriate in-plant, paramedic, or community medical support.
Refer to MSDS sheets for both products for detail information. MSDS sheets are available upon request.
• Soft foam headrest may be repeatedly cleaned using a
disinfectant solution. This practice is recommended
between the testing of each subject.
• The exterior of the instrument may be easily cleaned
with a soft cloth dampened in a mild solution of soap
and water.
• Test Slides are in a completely enclosed module, hence
cleaning is rarely required. If required, slides may be
cleaned utilizing a household-type glass cleaner.
Remove slides before cleaning. Do not use abrasives as
they will damage the slide.
• Do not immerse slide in cleaning solution. Dampen soft
cloth with solution and gently wipe clean. Dry the slides
with a soft cloth or tissue.
Dust Cover: Use dust cover to protect the instrument and prevent dust accumulation when not in use.
Maintenance of the Vision Screener
Recommended Service Schedule
• Clean/disinfect the headrest foam: AFTER EACH PATIENT OR AS REQUIRED
• Clean the front surface of the unit: AFTER EACH PATIENT OR AS REQUIRED
• Inspect Instrument: DAILY
• Clean front test lens: DAILY
• Clean outside of instrument: WEEKLY
• Clean test slides: MONTHLY
• Replace Light Module: AS INDICATED BY THE CONTROL PANEL OR IF TESTS SEEM VERY DIMLY LIT
Replacing Light Module
Please contact a Service Center for replacing the light module. To find out your nearest Service Center, please call 1-800—
446-1802 or +1-804-452-5200.
Page 18