Do you have a question about the Sperry instrument SP-10A and is the answer not in the manual?
Continuity | Yes |
---|---|
dB Measurement | No |
Display Type | LCD |
Battery Type | 9V |
Display | LCD |
AC Voltage Ranges | 200V, 600V |
DC Current Ranges | 200µA, 2mA, 20mA, 200mA, 10A |
Resistance Ranges | 200Ω, 2kΩ, 20kΩ, 200kΩ, 2MΩ |
Display Digits | 3.5 |
Current Range (DC) | 200µA, 2mA, 20mA, 200mA, 10A |
Resistance Range | 200Ω, 2kΩ, 20kΩ, 200kΩ, 2MΩ |
Frequency Range | No |
Capacitance Range | No |
Temperature Range | No |
Details on installing the correct battery and fuse for instrument operation.
Procedures for zeroing the meter and connecting test leads for accurate measurements.
Guidelines for achieving best accuracy and setting the range switch correctly.
Step-by-step instructions for measuring AC and DC voltages with the multimeter.
Procedures for measuring DC current and resistance, including safety precautions.
How to test batteries and measure decibels using specific meter ranges.
Essential safety rules and general maintenance tips for long-term instrument care.
Information on available accessories and part numbers for replacement.