Sphere RVX-45 User Manual

10
Warning: rated current for replacement fuse should be within 10-15A, no less than
10A and Max. 15A.
Fuse with rated current less than 10A will be easily burnt during compressor starting
procedure;
Fuse with rated current more than 15A will impact on the Vehicle’s AUX power circuit and
could cause a fire from overheated cables and connections.
2. Steps for replacing the light PCB:
–Unplug the power plug and open refrigerator’s lid;
–Pry out the transparent light cover with a screwdriver;
–Unscrew the PCB mounting board;
–Pull out the connector wire terminal from the PCB;
–Replace the defective light PCB with a new one;
Fit new PCB using reverse of removal instructions.
Press the transparent cover back into the housing.
IX. Cleaning and Maintenance
Warnings: Always disconnect the appliance from the Power (Mains or DC supply)
power before you clean and service it.
Warnings: Do not use abrasive cleaning agents or hard objects during cleaning
as these can damage the refrigerator.
- Occasionally clean the device interior and exterior with a damp cloth.
-Clean air vent outlet frequently to ensure good air flow for optimal cooling and
operation.

Sphere RVX-45 Specifications

General

Brand	Sphere
Model	RVX-45
Category	Refrigerator
Language	English