SANITIZING
Below is Sphero’s step-by-step guide on how to clean and
properly disinfect Sphero BOLT.
1
Have the proper cleaning products, e.g. disposable
disinfecting wipes (Lysol or Clorox or similar brands are best)
or spray, paper towels (if using a spray) and disposable
gloves.
2
Wipe down BOLT’s outer surface. Wipe and spray away!
There are no charging ports or openings to worry about.
Just be sure not to use harsh solvents or anything abrasive or
sharp to clean them.
3
Allow BOLT to dry completely before placing it back on its
charger.
To Next Page
Loading...
