Do you have a question about the Spheros Thermo s 300 and is the answer not in the manual?
Voltage | 230 V |
---|---|
Water Capacity | 300 l |
Frequency | 50 Hz |
Power | 3.0 kW |
Thermostat | Yes |
Insulation | Polyurethane |
Specifies altitude limits for heater operation and CO2 adjustment requirements above 1500m.
Covers type approvals, installation requirements, model plate marking, and refueling safety.
Details conditions where the heater must not operate, including proximity to flammables and obstructions.
Outlines essential operating conditions, such as correct fuel, voltage, and coolant antifreeze.
Explains the terms and conditions for making liability claims related to the heater.
Describes how to switch the heater on and prepare the vehicle's heating system.
Details the timer's capabilities, including programming, wake-up alarms, and display information.
Explains how to adjust timer settings, operate it, and its behavior with ignition status.
Instructions for manually switching the heater on and off, and setting remaining operating time.
Guide to setting the current time and day of the week on the timer.
Steps for programming specific heater start times and recalling/erasing preset times.
Procedure for setting and recalling the wake-up alarm function on the timer.
Instructions for programming the duration of the heater's operating time.
Information on the possibility of using an optional external remote control.
Details how the heater monitors components and records operational data for faults.
Lists the causes that trigger a fault lock-out, such as low voltage or flame failure.
Provides variants for resetting the heater after it has entered fault lock-out mode.
Specifies conditions leading to a heater lock-out, often related to safety components.
Explains how flash codes and timer displays indicate malfunctions.
Describes the composition of flash codes, including short and long pulses.
Lists specific flash codes and their corresponding malfunction descriptions for diagnostics.