will flash simultaneously and the Spider will default to a rapid reporting state (8-10 second
intervals in the general case).
NB: The SOS state can not be disabled any other way than to power-cycle the Spider.
3.6. Adjusting the LED Brightness
You can adjust the LED brightness on the keypad by pressing and holding the Mark button.
The LED will cycle through the levels of brightness. Release the Mark button when your
desired brightness is reached.
3.7. Spidertxt 2.0
The Spider 8 is equipped with Low Energy Bluetooth (BLE) technology and is compatible
with Spidertxt 2.0. This enables two-way freeform messaging to/from the cockpit using a
mobile device connected to the Spider.
For more information on Spidertxt 2.0 please refer to STL Manual Spidertxt.pdf or contact
Spidertracks support.!
To Next Page
Loading...