This document is a product guide for the Spike Solo brewing system, manufactured by Spike Brewing Equipment in Milwaukee, WI. It provides detailed information on the various components of the system, including their functions, specifications, usage, and maintenance tips.

Function Description:

The Spike Solo is a comprehensive brewing system designed for homebrewers, offering a streamlined and efficient process for crafting beer. It integrates several key components to manage heating, liquid transfer, chilling, and temperature control, ensuring a consistent and high-quality brewing experience. The system is built around a central kettle, a control panel for managing brewing parameters, a basket for mashing, a pump for liquid transfer, a wort chiller for rapid cooling, and various hoses for connections.

Important Technical Specifications:

The product guide details the individual components and their quantities:

Brewing Control Panel:

The control panel is the brain of the Spike Solo system, featuring a PID (Proportional-Integral-Derivative) controller for precise temperature management. It includes switches for power, element control, pump operation, and an auxiliary (AUX) output. The AUX switch powers a side plug, designed to work with Spike Brewing's Steam Condenser Lid package, but can also be used for charging phones or laptops.

Kettle:

The kettle is the primary vessel for brewing. It includes:

MNPT x QC Fitting (2): Male National Pipe Taper (MNPT) to Quick Connect (QC) fittings, used for secure and quick connections.
3pc Ball Valve (2): Three-piece ball valves, providing robust control over liquid flow.
5/8" Quick Connect Fitting (2): Quick connect fittings for easy attachment and detachment of hoses.
Side Pickup Tube (2): Tubes designed to draw liquid from the side of the kettle.
Heating Element (1): A crucial component for heating the wort, ensuring precise temperature control during brewing.
1.5" TC Gasket (1): A Tri-Clamp gasket for a sanitary seal.
1.5" TC Clamp (1): A Tri-Clamp for securing connections.
Temp Probe (1): A temperature probe for accurate measurement within the kettle, feeding data to the PID controller.

Basket:

The basket is used for mashing grains during the brewing process. It includes:

MNPT x QC Fitting (1): For connections within the basket assembly.
5/8" Quick Connect Fitting (1): For quick hose connections.
Side Pickup Tube (1): To draw liquid from the basket.
Mash Recirculation Hose (1): A hose specifically for recirculating mash liquid.

Assembly:

The assembly section outlines the main components that come together to form the complete brewing system:

Lid (1): Covers the kettle.
Basket Assembly (1): The assembled basket component.
Kettle Assembly (1): The assembled kettle component.

Wort Chiller:

The wort chiller is essential for rapidly cooling the hot wort after boiling, preventing off-flavors and preparing it for yeast pitching. It includes:

Quick Connect Fitting - MQC x MNPT (2): Male Quick Connect (MQC) to Male National Pipe Taper (MNPT) fittings for connecting to water sources and the brewing system.
Hose Barb (1): For connecting hoses.
Hex Nipple (1): A hexagonal nipple for connecting components.
T-Fitting (1): A T-shaped fitting for splitting or combining fluid flow.
Temperature Probe (1): For monitoring the temperature of the wort during chilling.

Pump:

The pump is used for transferring liquids throughout the brewing process, such as moving wort from the kettle to the fermenter or recirculating mash. It includes:

FNPT x QC Fitting (2): Female National Pipe Taper (FNPT) to Quick Connect (QC) fittings for pump connections.
3pc Ball Valve (1): For controlling flow through the pump.
Pump (1): The main pump unit.
Pump Head Screws (4): For securing the pump head.

Hoses:

The system includes various hoses for connecting components:

FQC x Barb (4): Female Quick Connect (FQC) to barb fittings.
Hose - 4' (2): Two 4-foot hoses.
Mash Tun Recirculation Hose - 2' (1): One 2-foot hose specifically for mash recirculation.

Usage Features:

Autotune for HLT PID: Before the first brew day, users must perform an "Autotune" calibration for the PID controller. This process allows the PID to self-calibrate for efficient and accurate heating, optimizing the brewing process. The guide provides step-by-step instructions for this one-time setup, involving heating the kettle to approximately 150 degrees and then following a sequence of button presses on the control panel. The autotuning process takes about an hour.
Control Panel Functionality: The control panel offers intuitive control over the brewing process with dedicated switches for power, heating element, and pump. The AUX switch provides additional utility for accessories like the Steam Condenser Lid or general charging.
Quick Connect Fittings: The extensive use of quick connect fittings throughout the system (kettle, basket, wort chiller, pump, hoses) simplifies assembly, disassembly, and cleaning, making the brewing process more user-friendly.
Basket Hanging System: The basket is designed to hang securely on the kettle lip using two welded basket hangers, ensuring stability during mashing.
Pump Head Rotation: The pump head can be rotated in 90-degree increments, offering flexibility in setup and hose routing. This is achieved by removing four screws, rotating the head, and then re-tightening the screws.
Oversized Hose Barbs: To eliminate the need for hose clamps and ensure a full port flow without restriction, the system utilizes oversized barbs for silicon tubing connections, providing a secure attachment.

Maintenance Features:

NPT Fitting Sealing: For all threaded NPT fittings, the guide recommends using 3-4 wraps of pipe tape in a clockwise direction to ensure a leak-free seal. It also advises adjusting the amount of pipe tape and tightness if a fitting is not oriented correctly after tightening.
Heating Element Connection: Users are instructed to ensure the heating element is properly plugged in and its power cord is fully twisted into position. Failure to do so can increase electrical resistance and potentially cause the plug to melt.
Wort Chiller Performance: For brewers in areas with high ground water temperatures, a pro tip suggests submerging the wort chiller in an ice water bath during the final stages of chilling to enhance cooling efficiency.
Pump Maintenance: The ability to rotate the pump head facilitates cleaning and maintenance, allowing access to different parts of the pump.

The Spike Solo Product Guide emphasizes ease of use, precision, and durability, making it an ideal system for homebrewing enthusiasts.

Spike Solo - Wort Chiller

Table of Contents

Related product manuals