Attaching the motor to the mount
Hold the motor with the wires on the
left and away from you. The ‘nub’
facing you.
Place the arm side motor mount acrylic
piece over the motor, making sure that
the ‘nub’ fits in the hole in the mount.
Nub
Hold the other motor mount as
above. Place against the wire
side of the motor
Place the weld nuts into the holes on the
arm side of motor mount.
The weld nuts
Hold the weld nuts in place
with tape or your fingers. In
the next step we will be
screwing them in place.
Nub
To Next Page
Loading...