spikenzielabs Useless Machine - User Manual

For the best outcome, follow each step in order.
We recommend reading this guide entirely before you get started.
Tools required:
One phillips screwdriver, and one flat screwdriver, soldering Iron, solder, snips and
supplies to build your own Useless Machine.
The Useless Machine
Parts Only - Build Guide
v0001
TM

spikenzielabs Useless Machine Specifications

General

Brand	spikenzielabs
Model	Useless Machine
Category	Control Unit
Language	English

Summary

Kit Components and Safety Precautions

Safety Warning: Snipping Legs

Emphasizes wearing safety glasses when snipping component legs due to potential high-speed projectiles.

PCB Assembly Steps

Switch Installation and Soldering

Resistor Placement and Soldering

Screw Terminal Installation and Soldering

LED Alignment and Soldering

Snap Switch Installation and Soldering

Integrating PCB and Motor Assemblies

Attaching PCB to Motor Mount

Explains how to place the PCB assembly onto the motor mount and secure it with screws and nuts.

Securing Second Side and Spindle Check

Motor Shaft and Arm Attachment

Adjusting Motor Shaft Position

Provides steps to adjust the motor shaft to the 12 o'clock position using the battery pack.

Attaching the Arm to Spindle

Guides on placing the large washer and aligning the arm onto the motor spindle.

Final Assembly and Mounting

Installing the Base

Securing Motor Assembly to Base

Wiring Connections

Connecting Battery Wires

Instructs on connecting the red and black wires from the battery pack to the PCB's +RED and -BLACK terminals.

Connecting Motor Wires

Guides on connecting the motor wires to the appropriate screw terminals on the PCB.

Testing and Troubleshooting

Motor and Wiring Test Flowchart

Outlines a step-by-step process to test functionality and provides troubleshooting tips.