Spimbey 2001 - Swing Hangers (Step 1)

SWING HANGERS
1
1. Locate and install parts as shown.
2. Make sure to orient hangers as shown
Parts Required:
220 X 1
221 X 1
Swing Hangers X 6
220
221
Orient swing hangers
to swing as shown.
5/16 Flat Washer x2
40.19”
[102.1]
Note the hole location in both
beams for correct orientation
Install swing hangers into (6) holes as shown
14.00” [35.6]
5/6 Lock Nut