EasyManua.ls Logo

SpinaliS BASIC - Maintenance; Warranty and Service

SpinaliS BASIC
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Instructions for Use
5
SpinaliS SpinaliS
4. WARNINGS
The user is advised against using the chair for any other activity than sitting.
WHEN SITTING DOWN ON THE CHAIR, USE BOTH HANDS TO HOLD THE ARMRESTS.
• DO NOT STEP ON THE CHAIR.
• DO NOT ROCK ON THE CHAIR (unless all castor wheels are resting on a at surface).
• Instruct any person not used to the chair how to sit on it properly.
The maximum weight of a user is 110 kg (242,5 lbs).
• Do not put your hands within range of the spring.
The user is not allowed to attempt repairs or to replace chair components.
5. Maintenance
Wipe the seat surface and other components with a moist cloth and mild detergent as
required.
• In special climatic conditions, the sliding mechanism may develop a “squeaking sound.
This is easily overcome with a drop of oil applied onto the backrest support (M).
6. Warranty and Service
The SpinaliS chair is covered by a 3-year warranty for all components except the uphol-
stery material.
The manufacturer guarantees to repair the product within 45 days of the date of reporting
a fault in the case of latent material or workmanship defects. If the product is not repaired
within the said period, the manufaturer undertakes to replace it with a new one.
• Replacement parts and servicing shall remain available for at least 7 years from the date of
purchase.
The warranty does not cover mechanical damage, misuse, failure to maintain the product
properly or interference by unauthorised persons; the warranty is void without an edorsed
warranty sheet and invoice.
• Any inquiries about servicing should be addressed to the vendor.
• In the event of any problems concerning servicing, please contact SpinaliS at the address:
service@spinalis.net
7. Standards, Certicates and Patents
The SpinaliS is designed and manufactured in compliance with the following standards: EN
1335-1, EN 1335-2, EN 1335-3. According to the EN 1335-2 standard, the chair is classied in
group B. SpinaliS is protected under patent application PATENT-SI-20508, pat. pend.-PCT/
SI00/00033TUV-A-MHF/SF-1/02-03202.
COPYING OR UNAUTHORISED USE OF THE PATENT IS LEGALLY PROSECUTABLE.
Awards, certicates and recognition awarded to SpinaliS so far:
USA/UK
Navodila za uporabo.indd 5 25.2.2009 8:15:27