IM-P402-44 AB Issue 15
18
5.3 Probe clearance record sheet
We strongly recommend that a record of the probe clearance test is kept, and a sheet is provided
for this purpose. This must be completed each time the probe is fitted/refitted.
How to complete the sheet:
- Date: The date the test procedure was carried out.
- Reason for test: Initial installation or annual inspection.
- Clearance 14 mm ( "): A signature in this box signifies the test has been successfully
completed, verifying the tip clearance is greater than 14 mm ( ").
- The (competent) person who did the tests must sign this box.
Verification Signatures
Clearance Checking
Date Reason for test 14 mm ( ") wires Independent
or more removed assessor
To Next Page
Loading...
