Need help?Do you have a question about the Spirit FOLIO SX mixer and is the answer not in the manual?
Guidance on setting up the mixer and essential safety measures for safe operation.
Details on connecting microphones using XLR connectors, including phantom power.
Instructions for connecting line-level sources using jack inputs and impedance.
Explanation of the insert point for adding external signal processing units.
Description of the Mix and Sub outputs and their balanced connections.
Information on auxiliary outputs for sending signals to external devices.
Explanation of direct outputs for sending individual channel signals.
Best practices for grounding and shielding to minimize noise and interference.
Overview of mono channel controls: Direct Out, Mic/Line Input, Insert Point.
Explanation of Sens, Hi-Pass Filter, EQ, Aux Sends, Pan, On, Mix/Sub, Fader, Pre/Post, PFL.
Details on RCA and TRS stereo inputs, level, gain, and routing.
Explanation of stereo channel controls: Aux Sends, Balance, On, Mix/Sub, Fader, PFL.
Description of Phantom Power, Meters, 2TK Level, Monitor, and Aux Masters.
Explanation of Aux AFLs, Aux 2 Pre/Post, Mono Sum, Master Faders, and Sub to Mix.
Guidance on selecting and positioning microphones for optimal sound reinforcement.
Step-by-step guide for initial mixer setup, including gain staging and level setting.
Configuring direct outputs for pre or post fader operation for recording.
Essential precautions for maintaining the mixer's condition and longevity.
To Next Page
General