Need help?Do you have a question about the Spirit FOLIO Notepad and is the answer not in the manual?
Connect microphones to this input, using balanced mics for interference prevention.
Connect keyboards, drum machines, or other electronic instruments for signal input.
Controls input gain for mics/instruments, crucial for avoiding distortion or hiss.
Adjusts high (treble) and low (bass) frequencies to shape the sound quality.
Creates a separate mix to send signals to an external effects or reverb unit.
Positions the sound signal within the stereo field (left/right).
Sets the level of the source signal in the stereo mix.
Connect stereo sources like keyboards, drum machines, or CD players via RCA phono plugs.
Switch for selecting instrument/turntable input, enabling RIAA preamplifier for record turntables.
Sets the input level for stereo sources, crucial for optimal sound quality.
Allows a separate mono mix of stereo channels to be sent to external effects.
Adjusts the relative level between the left and right sides of a stereo source.
Controls the output level of the stereo source in the stereo mix.
Combined mix output for external amplifiers or recording devices.
Connects outputs from an effects unit back to the mixer.
Switch to select between Master Mix or Tape input for monitoring.
LEDs indicating signal level for headphones/monitors (AVG and PK).
Important steps to set input levels correctly for optimal mixer sound quality.
Common issues and solutions for power, microphone, signal, and turntable problems.
To Next Page
General