8
Technical information
Noise
Vibration
Declaration
of conformity
Measured values determined according to EN 60745. Typically the A-weighted noise
levels of the tool are:
Sound pressure level: chisel: (97+3) dB(A) drill: (92+3) dB(A)
Sound intensity level chisel: (108+3) dB(A) drill: (103+3) dB(A)
Wear ear protection!
The vibration emission level given in this information sheet has been measured in
accordance with a standardised test given in EN 60745 and may be used to com-
pare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool.
However if the tool is used for different applications, with different accessories or
poorly maintained, the vibration emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the
times when the tool is switched off or when it is running but not actually doing the
job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibra-
tion such as: maintain the tool and the accessories, keep the hands warm, organisa-
tion of work patterns.
We declare under our sole responsibility that this product is in conformity with the
following standards or standardized documents:
EN 60745-1, EN 60745-2-6, IEC 60745-1, IEC 60745-2-6, EN 55014-1, EN 55014-2,
EN 61000-3, in accordance with the regulations 2004/108/EC, 2006/42/EC.
Didier BOURRETTE Jens STELLWAG
Technical file at: Jens Stellwag
SPIT S.A., Route de Lyon - B.P. 104, F-26501 Bourg-les-Valence
Characteristics
Voltage 110 V 220-240 V 110 V 220-240 V
Amperage 9.8 A 4.6-4.8 A 9.8 A 4.6-4.8 A
Frequency 50-60 Hz 50-60 Hz
Power input 1100 W 1100 W
Idle running 0-600 min
-1
---
Rotation speed 0-400 min
-1
---
Hammer rate strokes 0-3000 min
-1
0-3200 min
-1
Impact energy max. 10 J max. 11 J
Weight 6.3 kg 5.9 kg
Cable length 4 m 4 m
Carbons
self-disconnecting self-disconnecting
Angel of chisel 16 positions 16 positions
Switch
with electronic control with electronic control
Tool fixing S2S max S2S max
Class II
SPIT 352 SPIT 452
Vibration total values (triax vector sum)
determined according to EN 60745
352 SVC 352 452 452 SVC
Vibration emission drill a
h,HD
9.8 17.9 - - - -
value m/s² chisel a
h,CHeq
7.2 11.4 15.9 7.2
Uncertainty m/s² K 1.5 1.5 1.5 1.5
To Next Page
Loading...
