7
For your safety
Please observe the general drawing and explanations on the inner
cover!
■ This machine can be operated safely only when the operat-
ing instructions have been completely read and strictly
observed to. It is recommended to receive practical
instruction before using the machine for the first time.
■ Always inspect cable and plug before using the machine. Have
damage repaired only by a qualified professional.
■ In order to avoid any risks, the connecting cable – if damaged –
has to be replaced by the manufacturer or his agency.
■ Insert plug in power supply socket only when machine is switched
off.
■ The tool is provided with a torque limiter which protects the oper-
ator if the drill bit gets stuck. This torque is however controlled only
if the user is holding the tool firmly with both hands and is
in a stable position (e.g. not on a ladder).
■ The machine must not be used when damp and must not be
operated in wet environment.
■ Never use the machine without the auxiliary handle (6).
■ Do not touch rotating tools.
■ Use safety glasses, ear protectors, dust protection mask as well
as wear protective gloves and safety shoes.
■ Beware of electric lines, gas and water pipes embedded in walls.
■ Use only genuine accessories.
Non-observance of the safety instructions and
the prescriptions regarding the prevention of
accidents will occur the risk of injury!
See enclosure for further safety instructions!
GB
To Next Page
Loading...